Family · Community report
Prototype a newborn home dashboard
@curtis_zeng reports flashing Muse Gadget onto an unused Raspberry Pi and building a newborn monitoring dashboard, with a Nest thermostat, Dyson air purifier and baby monitor as their whole smart home. This page shows how to prototype a newborn home dashboard that displays room readings and never replaces watching the baby.
What you can get
- Prepare
Devices you own and documented data-access options
- Ask and review
Decide what the screen is for, such as room temperature, humidity, air quality and a feed log, and write down that it is not a safety monitor.
- Check the result
A privacy-reviewed, non-critical home dashboard prototype with stale-data indicators and explicit safety limitations.
The source case
@curtis_zeng reports repurposing a Raspberry Pi by flashing Muse Gadget onto it and building a newborn-monitoring dashboard. They mention a Nest thermostat, Dyson purifier and baby monitor as their limited smart-home setup, but do not establish which devices the dashboard actually connects to. This is a hobby dashboard report, not a validated safety or medical monitor.
A public report by someone outside this library. Not independently reproduced here.
From the source
Source excerpt
The Raspberry Pi I bought last time to run @OpenClaw has been collecting dust ever since, so I finally put it to use and flashed @Muse Gadget onto it.
Quoted from the original posts. Not written by this guide, and not a result produced here.
Suggested prompt
Bring Devices you own and documented data-access options, A local prototype device and a narrow display goal, Privacy rules for any infant-related information. Source community report, checked 2026-10-08.
Written by this guide as a starting point, not quoted from the source. Your edits stay in this browser.
What you need
You supply
- Devices you own and documented data-access options
- A local prototype device and a narrow display goal
- Privacy rules for any infant-related information
How to try it
Editorial, not from the source
- Decide what the screen is for, such as room temperature, humidity, air quality and a feed log, and write down that it is not a safety monitor.
- List each device and its official data route. Mark devices without one as unavailable rather than scraping their apps.
- Set up the Pi. The author used Muse Gadget; whatever you use, give it read-only access.
- Show the last-updated time next to every reading, with a clear no-data state.
- Test by unplugging a device and dropping Wi-Fi, and check the screen shows the reading as stale instead of the last value.
- Keep safe-sleep practice and the baby monitor you trust. The dashboard is for glancing at the room, not watching the baby.
What the report shows
@curtis_zeng had a Raspberry Pi gathering dust after buying it to run OpenClaw. They flashed Muse Gadget onto it and built what they call a newborn monitoring dashboard for their baby. They describe their smart home as limited: a Nest thermostat, a Dyson air purifier and a baby monitor, and they ask what other devices to add.
The post includes three photos but does not say in text which devices the dashboard reads from, what it displays, or how it was built. Read it as a hobby project, not a guide to integrations.
Getting data out of the devices you own
Each device decides what a dashboard can show. Google's Nest thermostats can be read through Google's Device Access programme, which needs a developer registration. Many air purifiers and baby monitors have no official public API, and the community integrations that exist can break when the maker updates its app. Home Assistant is a common hub for this kind of project and lists which devices it supports.
Start with what has a supported route and leave the rest off. A dashboard showing two reliable readings is more useful than one showing five that silently freeze.
Stale data, privacy and what a dashboard is not
The most important feature is the timestamp. If a sensor drops off Wi-Fi, a screen that keeps showing 21 degrees looks fine when it is not. Show when each value was last updated and grey it out after a few minutes. Keep camera and audio feeds off the dashboard unless you need them, since they are the most sensitive data in the house.
Infant safety relies on direct supervision and safe-sleep practice, not on a home-built screen. Check your health service's guidance on nursery temperature and safe sleep, and treat any reading on the dashboard as a convenience.
Open Muse to try it. That is the product's own site; this guide is not part of it.
Limits and confirmation points
Limits to confirm
- Dashboard code, device connections, data refresh, security settings and screenshots are not supplied.
- No monitoring accuracy, alert reliability or medical capability is established.
- This is an attributed community report, not reproduced by this guide. The suggested workflow and checks are editorial guidance, not a recovered conversation or guaranteed product capability.
If it goes wrong
Editorial, not from the source
- A reading stays at the same value for hours
- Check the last-updated time. Expired logins and dropped Wi-Fi are the usual causes; reconnect the device and refresh the account token.
- A device you own has no supported way to read its data
- Leave it off the dashboard or enter the value by hand. Scraping the maker's app is fragile and may break its terms.
- The screen lights up the nursery at night
- Add a night mode that dims or turns off the display on a schedule, or mount the screen outside the nursery.
Common questions
What is Muse Gadget?
The source only says the author flashed Muse Gadget onto a Raspberry Pi they already owned. It does not describe what Gadget includes or how the dashboard was built.
Can a home dashboard replace a baby monitor?
No. A dashboard shows room readings when its data sources are working. It is not a validated monitor, and nothing in the report suggests it is.
Which smart home devices can feed the dashboard?
Those with an official API or supported integration. Thermostats and temperature sensors are usually the easiest; many purifiers and baby monitors are closed.
Do I need a Raspberry Pi?
No. The author used one they had spare. An old tablet or any small computer with a screen can run a read-only dashboard.
Next
More in Family
Similar tasks
Get recurring task recommendations — ask your own agent to check for relevant updates.